Snowboarders Guide For Equipment And Clothing
Board – A beginner should have a board that has a beveled edge (so the edges don’t catch as easily), has a little flexibility, and is sort of hourglass-shaped like a maxi-pad, so that it is relatively easy to turn.
Boots – The most important thing is that the boot always moves with your foot. Since the boot is bound to the board and you are controlling it with your feet, if your foot moves within the boot, your foot movement will not translate into board movement. Make sure you get good boots.
1. The boot should be snug from toe to heel
2. When you lift your heel while standing, your heel should not move up inside the boot. That is, the heel should not come up off the floor of the boot. Raising your heel should raise the heel of the boot too and should not make a space between your heel and the boot.
3. You should not be able to rotate your foot or ankle with respect to the boot when the boot is wedged or pinned in a stationary position. Loose boots may be a problem for women renting men’s boots; their feet tend to be narrower.
Boots with dense, form-fitting foam in the heel solve problems (2) and (3). The foam is a part of the inside of the boot and protrudes into the recess of your Achilles’ tendon so that when your heel comes up, it catches on the foam and the boot comes up too. Don’t leave the rental equipment desk until you are happy – it could mean the difference between having control of your board and not having control of your board.
Helmet – You’ll want a helmet with good visibility that doesn’t block your peripheral vision, and one which doesn’t deafen you so you can hear skiers and riders approach from the sides and behind. Different countries have different safety certification names. So, if it is made in Europe, it might say CE. If it is made in the US it might say Snell. They are made to crack so your head doesn’t. Replace your helmet if the inside or outside becomes cracked.
Lacing up & Strapping in
Boots have lace holes and hooks. Pull hard on the laces when you lace them through the holes. Before hooking the laces through each set of hooks, tie them (like you tie your sneakers, except stop before you make a bow). After hooking the lace on the top hooks, tie them, then hook them through the bottom-most hooks again, tie them. Then hook them through the top-most hooks again and tie them in a bow. It is obvious where you put your feet on the board. The strap bindings look like sandals, except with a support for behind your ankle. Put your foot in – make sure your heel is all the way back, touching the support. Strap the ankle strap first, then the toe strap. Make sure you get them very tight. To walk around on flat ground, unstrap your tail foot. You’ll feel awkward for a while. Don’t sweat it. It goes away.
Clothing
your clothing should be warm, non-restrictive, water-resistant, and breathable.
Attire – Wear something you can move around in. Pants that are moderately tight, which work for skiing, won’t work for snowboarding. You’ll be bending your knees a lot more and twisting and squatting and balancing, so you won’t want restrictive clothing. Your jacket should significantly overlap your pants so you don’t get snow around your waist. So either get a long jacket that goes well below the top of your pants, or a normal-length jacket with tall ski pants underneath that cover your abs. I opted for the latter: tall ski pants ($29 USD) that looked and felt one size too large and nylon down jacket ($59 USD). I was dry, warm, and happy. Everything that touches snow must be water resistant. The lining and layer underneath don’t matter much as long as they don’t retain sweat. COTTON IS BAD. Chenille, fleece, or wool is good. Gore-tex is very good. You really don’t have to spend a fortune, but you must spend enough to be warm, breathable, and water-resistant (read the clothing labels).
Socks – Wear only ONE pair of socks: Ideally, thick long acrylic socks with a very loose weave (turn ‘them inside out to check).
Gloves – Get really warm, waterproof gloves – long ones that extend over the wrists of your jacket. Get gloves you feel comfortable in – not ones that make you feel like you’re wearing the claws of a giant bear suit costume. You want gloves in which you can EASILY make a fist, for reasons I’ll explain in a minute. They make warm, non-bulky gloves these days.
Goggles or glasses with polycarbonate lenses ($25 USD); these won’t shatter when you fall.
Scarf – tied securely, or turtle fur (a pull-over cylindrical thingy for your neck)
I was going down a steeper part of the mountain toeside, and I reached out in front of me and touched the slope with my hand and felt it as it went by.
About the Author
This article is published on robin scotts website
http://www.powder-zone.co.uk
|
|
Fly Tying with Common Household Materials by Fullum, Jay Fishy Edition ILL, $21.49 Novice fly fisherman start fly tying with a predictable set of materials. Their benches are neatly arranged with small bags of elk hair, pheasant feathers, stray pieces of chenille and yarn. But eventually they find that not only are these materials more expensive than they need to be, they are also largely unnecessary. And so they starts making substitutions, using trial and error to gradually build up a bench of funky, personalized materials that work just as well as what the “experts” recommend.For the first time, here is a book that truly demystifies fly tying, making it accessible to any fisherman with a vice, a hook, a few dabs of glue, and a handful of twisty-ties. Tying legend Jay “Fishy” Fullum brings together a lifetime of substitution experience to give invaluable advice on appropriate substitution materials. He describes how to find them and make them tier friendly, and how to turn them into flies that are practically guaranteed to catch fish. |
|
|
Fly Tying With Common Household Materials (Paperback) $30.41 How to save money and get better results—including 300 full-color photos Novice fly fisherman start fly tying with a predictable set of materials. Their benches are neatly arranged with small bags of elk hair, pheasant feathers, stray pieces of chenille and yarn. But eventually they find that not only are these materials more expensive than they need to be, they are also largely unnecessary. And so they starts making substitutions, using trial and error to gradually build up a bench of funky, personalized materials that work just as well as what the “experts” recommend. For the first time, here is a book that truly demystifies fly tying, making it accessible to any fisherman with a vice, a hook, a few dabs of glue, and a handful of twisty-ties. Tying legend Jay “Fishy” Fullum brings together a lifetime of substitution experience to give invaluable advice on appropriate substitution materials. He describes how to find them and make them tier friendly, and how to turn them into flies that are practically guaranteed to catch fish. |
|
|
White River Fly Shop Chenille Tying Material – Medium – Light Gray – Flies & Flytying $2.69 This Chenille Tying Material is a traditional body winding material for wooly worms, wooly boogers, crappie jigs, and other subsurface patterns. Plus, our Chenille’s velour texture creates a segmented appearance while increasing fish-attracting flash. Approximately 15 feet of Chenille per card. This Chenille Tying Material is a traditional body winding material for wooly worms, wooly boogers, crappie jigs, and other subsurface patterns. Plus, our Chenille’s velour texture creates a segmented appearance while increasing fish-attracting flash |
